McKinney TX Commercial Roofing | Allen TX Roofing

Your Commercial Service Roofing Provider

Our professional McKinney & Allen TX roofers specialize in all kinds of commercial roofing services, from roof coatings and standing seam roofing maintenance to TPO, PVC and modified bitumen installation. In order to provide the highest-quality service for our customers, we use the best manufactured roofing products available, including Conklin, Firestone, GAF, Carlisle, CertainTeed, McElroy and Berridge, just to name a few.

The following commercial services are done by our McKinney TX roofing company:

Spray Polyurethane Foam (SPF)

Truly remarkable system when combined with Conklin's elastomeric base coating, this system will work on virtually any roof. SPF, normally applied at an average of 1-inch thick, provides insulation and strength to the roof. It has a R value of 6.2 per inch. SPF closed-cell structures stop air infiltration, the chief culprit of most energy loss. Because SPF is fully adhered to the entire surface, there are no fasteners or seams, which could cause thermal shorts that may rob energy efficiency from a building. SPF also provides a continually seamless flashing around all protrusions. After SPF is applied to a roof, we apply Conklin's coating and topcoat over the foam. The highly reflective, Energy Star-rated coating reflect as much as 85 percent of the suns ultraviolet rays. SPF combined with Conklin's coating provides a fully adhered and completely seamless roof.

TPO or PVC Single-Ply Roofing Membranes

TPO (thermoplastic polyolefin) & PVC (polyvinylchloride) single-ply roofing provides superior resistance to a broad range of chemicals, ultraviolet rays and ozone. We install various types of single-ply roofing membranes with the highest-quality manufacturing, and these premium products have proven their durability and longevity over decades of exposure in the harshest environments. As a certified contractor, we can offer full roof system warranties for up to 20 years. TPO and PVC, in addition is an Energy Star-rated membrane, providing outstanding reflectivity (85 percent), which translates into exceptional energy efficiency.

Synthetic Slate

Our roofers provide quality synthetic slate at affordable pricing. Symphony Slate by CertainTeed is the truest replica to the real thing, and it comes with a lifetime warranty.

Modified Bitumen

Modified bitumen is considered one the most durable commercial roofing systems on the market. As a certified contractor for CertainTeed and GaAF/Elk, our roofing experts can offer a warranty up to 20 years. Application can come with self-adhering systems, mop down or torch down.

Fabric-Reinforced Ply System

The fabric-reinforced ply system combines the leak-resistant, seamless membrane of a liquid-applied system with the toughness and versatility of a strong single-ply system. The reinforcing fabric gives extra strength to the finished, watertight coating membrane without adding significant weight. With its reflective, energy-saving white topcoat, your finished ply system stands up against the harshest weather conditions and offers long-lasting protection.

EPDM Roof Coating System

A great alternative to a complete roof system, the EPDM (ethylene, proplyene diene Monomer) coating system is a three-step process - the new WAC II roofing surface cleaner, the new Tack Coat and Conklin's proven Rapid Roof III reflective topcoat. Used together, this system allows you to fix, rather than replace, leaks in your existing EPDM roof. Conklin's coating systems are sustainable indefinitely with periodic re-coats to upgrade the coating. A re-coat is a fraction of the original cost once the system is in place. The average time between re-coating is 15-25 years, depending on geographical location.

Flat Roof Coatings

With Conklin's roof coating system, an affordable and energy-efficient way to extend the life of an old roof up to an additional 20 years is available. Our roofers will prep the roof for the coating system and remove any old gravel and debris from the premises.

Metal Roof Coating

With our metal roof coating system, we remove rust using Rust-Off and a 3500-psi power washer. We then treat the metal with rust inhibitor. Following that, we check all fasteners for security and caulk all fasteners. We then seal all vertical and horizontal seams with Spunflex fabric embedded between two coats of acrylic elastomeric coating. We finally apply a seamless acrylic elastomeric topcoat over entire roof. This will provide a fully adhered completely seamless roof system.

Metal Roof Installation

This installation provides a wide choice of materials from standing seam, DECRA or Gerard stone-coated shingles. Metal roof installation assists in energy efficiency and environmental conservation, since metal roofs are recyclable.

Siding Installation

We carry the credentials Master Craftsman for CertainTeed Vinyl and Polymer siding. We also install fiber cement, Hardie Lap siding and other various materials to meet all of your siding needs.

Tear Off Previous Roof or Roofs

In the process of getting a new roof installed, the old roof must be torn off and disposed of in some cases. We will remove the old roof, hauling it away with the utmost respect of your property.

Roof Decking Replacement

The integral part of a solid foundation for your roof is the underlying decking it is attached to. Whether you have a few bad pieces or are in need of a complete redecking, we will insure that you have a great foundation in place.

Emergency Roof Repair

This is the only appropriate time we will accept being called "fly by night." Our company will make house calls 24 hours a day if your roof is in need of extreme emergency repair.